Download Cubot C30 Stock Rom Firmware Flash File

Cubot C30 Stock Rom Firmware

This post contains the Cubot C30 Stock Rom firmware Flash File that will allow you to restore your Cubot C30 Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.

Then this Cubot C30 Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Cubot C30 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Cubot C30 Flash File below. Download the right stock ROM file to fix your device.

Cubot C30 Stock Firmware Information

Download Cubot P40 Power Stock Rom Firmware Flash File

Cubot C30 Key Spec                    

General Features

• Platform: Android 9.0 Pie,
• Processor: Octa-Core Helio P23
• GPU: Mali- G71 MP2
• Memory: 4GB RAM
• Colors: Black, Gold, Blue
• Dimension: 156.60 x 74.30 x 8.1 mm
• Weight: –
• SIM Type: Nano SIM
• SIM Count: Dual SIM

Display

• Display: 6.3-inch, IPS FHD+ Capacitive Touchscreen, 2340 x 1080p (410 PPI)
• Screen Protection: –

Camera

• Rear Camera: 12MP (Primary) + 20MP ( Depth) + 8MP (Ultra-Wide) Camera
• Rear Camera Features: Autofocus, LED flash, Geo-tagging, touch focus, face detection, panorama
• Front Camera: 13MP Camera

Storage

• Built-in Storage: 64GB
• Memory Card Support: Yes, up to 128GB
• Bundled Cloud Storage: –

Network Support

• 2G GSM: Yes
• 2G CDMA 1X: –
• 3G WCDMA: Yes
• 3G CDMA EVDO: –
• 4G LTE: LTE band 1 / 3 / 7 / 8 / 19 / 20

Internet & Connectivity

• GPRS: Yes
• EDGE: Yes
• 3G/WCDMA/HSPA: Yes
• HSPA+: Yes
• CDMA EVDO: –
• 4G LTE: Yes
• WLAN: Yes, Wi-Fi 802.11 a/b/g/n
• Wi-Fi Hotspot: Yes
• Bluetooth: Yes, Bluetooth 4.2
• NFC: –
• Infrared Blaster: –
• USB Port: USB Type-C 2.0

Messaging

• SMS/MMS: Yes
• Instant Messaging: Yes
• Push Emails: Yes
• Email Protocol: –

Entertainment

• Music Player: Yes
• Video Player: Yes
• FM Radio: Yes
• Loudspeaker: Yes
• 3.5mm Jack: –

Navigation

• Navigation: Yes, with A-GPS, GLONASS, BDS
• Maps: Yes

Sensors & Control

• Digital Compass: Yes
• Accelerometer: Yes
• Proximity Sensor: Yes
• Light Sensor: –
• Barometer: -Yes
• SpO2: –
• Pedometer: –
• Heart Rate Monitor: –
• Gyroscope: Yes
• Fingerprint Scanner: Yes, (Rear-Mounted)
• Iris Scanner: –
• Face Unlock: Yes
• Intelligent Digital Assistant: Yes
• Motion Sensing / Gesture Control: –
• Voice Control: Yes

Other Features

• Video Streaming: Yes
• Active Noise Cancellation: –
• Wireless Charging: –
• Built-in Mobile Payment: –
• Water Resistant: –
• Dust Resistant: –
• Image Editor: –
• Video Editor: Yes
• Document Viewer: Yes
• Document Editor: Yes

Battery

• Battery: 4000mAh Non-Removable Battery

The Advantage Of Stock Firmware:

• Can be to unbrick your phone
• Fix the Boot loop problem
• upgrade and Downgrade your phone
• Unroot and Fix Bugs on your phone
• To fix stutter
• You can solve software errors by flashing Stock ROM.
• To gain your device warranty Back.

Android 9.0 Pie Feature List

• Adaptive Battery
• Dark Mode
• App Actions
• App Timer
• Adaptive Brightness
• Slices
• Accessibility Menu
• Easier Text Selection
• New Screenshot Shortcut
• A New Home Button
• New Gesture Navigation
• Easier Screen Rotation
• Notification Details
• Dashboard
• Indoor Navigation via Wi-Fi RTT
• An Improved DND Mode
• Lockdown Mode
• An Improved Message App
• All Apps use HTTPS
• The Media Panel
• ART Improvements
• 157 New Emojis
• Wind Down
• Multiple Camera Support
• Wi-Fi MAC Randomization

Why you need Cubot C30 Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.

• Downgrade or Upgrade your device: You can use the CUBOT C30 Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.

• Unbrick: The Cubot C30 Stock Rom Firmware can also be used to unbrick any device.  Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.

• Unroot: You can also use the Cubot C30 stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.

• Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Cubot C30 Flash File.

Things You Need

• Charge your device: Before you proceed with the below information, you are recommended to ensure that your Cubot C30is at least 50% charged.
• PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
• Take Device Backup: The very first thing you need to do is make a backup.
• Smart Phone Flash Tool Download
• Install the Latest Driver: CUBOT C30 USB Drivers
• Download: Download the above-required files on your PC.

[*] Caution: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

How To Flash Cubot C30 Stock Rom Firmware

1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.

Detailed Post on How to Flash Stock Rom using Smart Phone Flash Tool

How to flash this device using Tecno Transsion Flash Tool

1. Download and extract Tecno flash tool from here
2. Launch SWD_AfterSales inside the extracted folder
3. Click on the settings icon
4. Click on the Load button
5. Select the scatter file inside the stock ROM folder of the device you want to flash
6. Select either Firmware Upgrade or Format + Download from drop down menu.
7. Click Confirm Button.
8. Now turn off and connect your device to PC.
9. Wait for the flashing process to complete.
10. Reboot device

NOTE
If the while loading the scatter file you see a checksum error, copy checksumgen.exe into the firmware folder and then launch it.

Warning
We will not be held responsible if any damage happens to your device.

Cubot C30 Stock Firmware Rom

CUBOT_C30_A033C_V04_20200828

Download Full stock Rom