This post contains the Lenovo Tab 2 A7-20F Stock Rom firmware Flash File that will allow you to restore your Lenovo Tab 2 A7-20F Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this Lenovo Tab 2 A7-20F Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Lenovo Tab 2 A7-20F Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Lenovo Tab 2 A7-20F Flash File below. Download the right stock ROM file to fix your device.
Android 4.4 (KitKat), upgradable to 5.0 (Lollipop)
Chipset
Mediatek MT8127 (28 nm)
CPU
Quad-core 1.3 GHz Cortex-A7
GPU
Mali-450MP4
MEMORY
Card slot
microSD, up to 32 GB (dedicated slot)
Internal
8/16 GB, 1 GB RAM
MAIN CAMERA
Single
2 MP
Video
Yes
SELFIE CAMERA
Single
VGA
Video
SOUND
Loudspeaker
Yes
3.5mm jack
Yes
Dolby audio enhancement
COMMS
WLAN
Wi-Fi 802.11 b/g/n, hotspot
Bluetooth
4.0, A2DP
GPS
Yes, with A-GPS
USB
microUSB 2.0
FEATURES
Sensors
Accelerometer
BATTERY
Non-removable Li-Ion 3450 mAh battery
Stand-by
Up to 432 h
Talk time
Up to 8 h (multimedia)
MISC
Colors
Black
Price
About 100 EUR
The Advantage Of Stock Firmware:
Can be to unbrick your phone
Fix the Boot loop problem
upgrade and Downgrade your phone
Unroot and Fix Bugs on your phone
To fix stutter
You can solve software errors by flashing Stock ROM.
To gain your device warranty Back.
Why you need Lenovo Tab 2 A7-20F Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.
Downgrade or Upgrade your device: You can use the LENOVO TAB 2 A7-20F Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
Unbrick: The Lenovo Tab 2 A7-20F Stock Rom Firmware can also be used to unbrick any device. Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.
Unroot: You can also use the Lenovo Tab 2 A7-20F stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Lenovo Tab 2 A7-20F Flash File.
Things You Need
Charge your device: Before you proceed with the below information, you are recommended to ensure that your Lenovo Tab 2 A7-20F is at least 50% charged.
PC or Laptop:To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
Take Device Backup: The very first thing you need to do is make a backup.
Install the Latest Driver:LENOVO TAB 2 A7-20F USB Drivers
Download: Download the above-required files on your PC.
How To Flash Lenovo Tab 2 A7-20F Stock Rom Firmware
Download the Stock Firmware on your personal computer.
Install the USB MTK Drivers (skip if you have it already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug your device and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.
Warning
We will not be held responsible if any damage happens to your device.