Oppo K3 CPH1955EX_11_A.04 Firmware update

0
855
Oppo K3 CPH1955EX_11_A.04 Firmware update
Oppo K3 CPH1955EX_11_A.04 Firmware update

Oppo K3 CPH1955EX_11_A.04 Firmware update:

Download & Install Oppo K3 CPH1955EX_11_A.04 Firmware update. If you own Oppo K3 Smartphone then you can update it to the latest OS using the Below Instructions.

The Oppo K3 CPH1955EX_11_A.04 Firmware update Will Integrate Android Security Patches Release on Oct 2019.

Oppo K3 Key Specs and Features

  • 6.5-inch, AMOLED capacitive touchscreen, 1080 x 2340 pixels (395 ppi)
  • Android 9 Pie OS; ColorOS 6
  • Octa-core Qualcomm Snapdragon 710 CPU with 6GB/8GB RAM
  • 64GB/128GB built-in storage
  • 16MP + 2MP  camera and 16MP pop-up front camera
  • 4G LTE
  • Face unlock
  • Fingerprint sensor (rear-mounted)
  • 3,765mAh  non-removable Li-Po battery

Note-

  • Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Must backup NVRAM using this Guide before Doing anything.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Firmware Information:

Device Name: Oppo K3
Type: OTA
Size: up to 2GB
SoC: QCOM SD710
Os: Android 9.XX
Password: Null
Root access: Not
Gapps: Included
Product Version: CPH1955EX_11_A.04

Changelog:

  • Security update oct 2019
  • When Passcode was not entered for over last 72 hours, fingerprint and face identification will No longer be available, and screen lock interface will Require for enter Passcode

Detailed Step On How To Flash Oppo Device Using MSM Download Tool

How To Flash Oppo K1 CPH1893EX_11_A.14 Firmware update

  1. Download and copy the stock firmware to the root directory of your SD Card (A root directory is the top-most directory in SD Card file systems).

Download and copy the stock firmware to the root directory of your SD Card

2. Insert your SD card, then power off the phone.

3. Press and hold the Power and Volume Down buttons, until your phone enters Recovery Mode.

4. Under the Recovery Mode, click [Install from storage device] > [Install from SD] , find the update package.

Install from storage deviceInstall from SD

5. Click the firmware. A confirmation message will appear on your screen. Click Yes. Your device will reboot and start updating, which will take some time.

  • Download :

Firmware CPH1955EX_11_A.04

LEAVE A REPLY

Please enter your comment!
Please enter your name here