Download Tecno Pova 2 LE7N Stock Rom Firmware Flash File

0
214
Download Tecno Pova 2 LE7N Stock Rom Firmware Flash File
Tecno Pova 2 LE7N

Tecno Pova 2 LE7N Stock Rom Firmware

This post contains the Tecno Pova 2 LE7N Stock Rom firmware Flash File that will allow you to restore your Tecno Pova 2 LE7N Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked, and wish to return it to factory state.

Then this Tecno Pova 2 LE7N Stock Firmware will fix your bricked phone; We will guide you on how to flash the right official Tecno Pova 2 LE7N Stock Firmware on your device without errors. This flashing guide is easy z straightforward to follow. We have listed the Tecno Pova 2 LE7N Flash File below. Download the right stock ROM file to fix your device.

Tecno Pova 2 LE7N Stock Firmware Information

Rom Name Tecno Pova 2 LE7N Stock Firmware Rom
Based On Stock OS
Rom OS Version Android
Rom Type Odexed
Socs MediaTek MediaTek Helio G85
Software needed Sp Flash Tool
Compress Zip format

 

Download Tecno T467 Stock Rom Firmware Flash File

Tecno Pova 2 LE7N Key Spec                    

  • Display6.9-inch IPS LCD display with a resolution of 1080 x 2460 pixels and a brightness of 480 nits.
  • Processor: MediaTek Helio G85
  • Memory and Storage:
    • RAM: Available in two variants: 4GB RAM with 64GB internal storage and 6GB RAM with 128GB internal storage.
    • Expandable Storage: Supports microSD.
  • Camera:
    • Main Camera: Quad-camera setup on the rear:
      • 48 MP primary lens with f/1.9 aperture and PDAF.
      • 2 MP macro lens.
      • Two 2 MP depth sensors.
      • Features include Quad-LED flash.
      • Video recording capabilities: 1440p@30fps and 1080p@30fps.
    • Selfie Camera: Single 8 MP front camera with f/2.0 aperture and Dual-LED flash. Video recording at 1080p@30fps1.
  • Battery: T7000 mAh
  • Operating System: Runs on Android 11
  • Connectivity:
    • Network: Supports GSM, HSPA, and LTE.
    • Wi-Fi: 802.11 a/b/g/n/ac, dual-band.
    • Bluetooth: Version 5.0 with A2DP and LE.
    • Positioning: GPS, GALILEO, and BDS.
    • NFC: Yes.
    • Radio: FM radio.
    • USB: USB Type-C 2.0 with OTG support.

The Advantage Of Stock Firmware:

  • Can be to unbrick your phone
  • Fix the Boot loop problem
  • upgrade and Downgrade your phone
  • Unroot and Fix Bugs on your phone
  • To fix stutter
  • You can solve software errors by flashing Stock ROM.
  • To gain your device warranty Back.

Android 11 Feature List

  • Message bubbles and ‘priority’ conversations
  • Redesigned notifications
  • New Power Menu with smart home controls
  • New Media playback widget
  • Resizable picture-in-picture window
  • Screen recording
  • Smart app
  • New Recent Apps screen
  • Back gesture sensitivity
  • iPhone-like screenshot visuals
  • Dark mode scheduling
  • Single-time app permissions
  • Voice access – controlling your phone with your voice

Android 10 Q Feature List

  • Live Caption
  • Smart Reply
  • Sound Amplifier
  • Gesture Navigation
  • Dark Theme
  • Privacy Controls
  • Location Controls
  • Security Updates
  • Focus Mode
  • Family Link

Why you need Tecno Pova 2 LE7N Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for the following reasons someday.

  • Downgrade or Upgrade your device: You can use the TECNO POVA 2 LE7N Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
  • Unbrick: The Tecno Pova 2 LE7N Stock Rom Firmware can also be used to unbrick any device.  Smartphones can be bricked while trying to root it or flashing a custom rom or recovery.
  • Unroot: You can also use the Tecno Pova 2 LE7N stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
  • Fix Issues: Your device might develop software-related issues; you can fix that by flashing the Tecno Pova 2 LE7N Flash File.

Things You Need

  • Charge your device: Before you proceed with the below information, you are recommended to ensure that your Tecno Pova 2 LE7N is at least 50% charged.
  • PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing you need to do is make a backup.
  • Smart Phone Flash Tool Download
  • Install the Latest Driver: TECNO POVA 2 LE7N USB Drivers
  • Download: Download the above-required files on your PC.

[*] Caution: On Mediatek-powered devices, We do NOT recommend Flash the Preloader.bin. As it may brick the device, therefore we recommend you Untick the Preloader while Flashing the firmware.

How To Flash Tecno Pova 2 LE7N Stock Rom Firmware

  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Disable the SLA Authentication by following this Guide
  4. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  5. Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
  6. Select the Scatter File from the extracted Stock Firmware on your computer.
  7. Select the Download Only in the SP Flash tool option
  8. Click the Download button to start the Formatting process.
  9. Connect your device via USB to the computer>> holding the volume + and volume – buttons of your device at the same time or holding the power button only so that the flashing process will start working
  10. Patiently wait for your device to be formatted.
  11. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  12. Unplug your device and boot it up.
  13. If you have a boot loop after booting your device, boot into recovery mode, and do a factory reset.
  14. Voila, you are all good.

Detailed Post on How to Flash Stock Rom using Smart Phone Flash Tool

How to flash this device using Tecno Transsion Flash Tool

  1. Download and extract the Tecno Flash tool from here
  2. Launch SWD_AfterSales inside the extracted folder
  3. Click on the settings icon
  4. Click on the Load button
  5. Select the scatter file inside the stock ROM folder of the device you want to flash
  6. Select either Firmware Upgrade or Format + Download from the drop-down menu.
  7. Click Confirm Button.
  8. Now turn off and connect your device to your PC.
  9. Wait for the flashing process to complete.
  10. Reboot device

NOTE
If while loading the scatter file you see a checksum error, copy checksumgen.exe into the firmware folder and then launch it.

Warning
We will not be held responsible if any damage happens to your device.

Tecno Pova 2 LE7N Stock Firmware Rom
  • Firmware Tecno LE7N RU V155: Download
  • Firmware Tecno LE7N GLO V651: Download
  • LF7n-H6918F-S-RU-220719V1121: Download

TECNO LE7n MDM Remove (Just Flashing) LE7n-H697MN-R-GL-220418V291

TECNO LE7n MDM Remove (Just Flashing) LE7n-H697MN-R-RU-230518V359

LE7n-H697MN-R-GL-220418V291

LE7n-H697MN-R-GL-220219V283

LE7n-H697MN-R-GL-210813V266

LE7n-H697MN-R-GL-210813V206

LE7n-H697MN-R-GL-210728V255

LE7n-H697MN-R-GL-210727V199

LE7n-H697MN-R-GL-210423V149

LE7n-H697MN-R-GL-210422V132

LE7n-H697MN-R-RU-230518V359

LE7n-H697MN-R-RU-230330V350

LE7n-H697MN-R-RU-230110V338

LE7n-H697MN-R-RU-221111V331

LE7n-H697MN-R-RU-220929V326

LE7n-H697MN-R-RU-220803V318

LE7n-H697MN-R-RU-220612V310

LE7n-H697MN-R-RU-220414V306

LE7n-H697MN-R-RU-211210V290

LE7n-H697MN-R-RU-210813V275

LE7n-H697MN-R-RU-210728V266

LE7n-H697MN-R-RU-210422V155

LEAVE A REPLY

Please enter your comment!
Please enter your name here