Download Vivo Y53C Stock Rom Firmware Flash File

Vivo Y53C Stock Rom Firmware

This post contains the Vivo Y53C Stock Rom firmware Flash File that will allow you to restore your Vivo Y53C Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.

Then this Vivo Y53C Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Vivo Y53C Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Vivo Y53C Flash File below. Download the right stock ROM file to fix your device.

Vivo Y53C Stock Firmware Information

Vivo Y53C Key Spec                   

The Advantage Of Stock Firmware:

• Can be to unbrick your phone
• Fix the Boot loop problem
• upgrade and Downgrade your phone
• Unroot and Fix Bugs on your phone
• To fix stutter
• You can solve software errors by flashing Stock ROM.
• To gain your device warranty Back.

Why you need Vivo Y53C Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.

• Downgrade or Upgrade your device: You can use the VIVO Y53C Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.

• Unbrick: The Vivo Y53C Stock Rom Firmware can also be used to unbrick any device.  Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.

• Unroot: You can also use the Vivo Y53C stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.

• Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Vivo Y53C Flash File.

Things You Need

• Charge your device: Before you proceed with the below information, you are recommended to ensure that your Vivo Y53C is at least 50% charged.
• PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
• Take Device Backup: The very first thing you need to do is make a backup.
• Download: Download the above-required files on your PC.

How to Flash Vivo Y53C Stock Rom Firmware Flash File

Warmly Tips:

Limited by Android 8 and higher version, the phones with Android 8 and higher version cannot flash the lower version(You can check the current version of your phone in Settings>System update).

This process will clear data on your phone, like contacts, messages. Please back up your important data before doing it. Moreover, make sure the battery capacity is sufficient(over 30%).

For the Fullview Display phones:

1. Perform Wipe data on your phone:
2. Power off your phone, then press and hold the Power button and Volume up button simultaneously until Vivo logo appears to enter Fastboot mode. Select the Recovery mode by pressing the Volume down button and enter it by pressing the Power button;
3. Touch Wipe data>Wipe data>enter the lock screen password. Then select Reboot system to reboot your phone.
4. Download the corresponding firmware for your phone;
5. Move it to the root directory of your phone storage or SD card without decompressing;

Note: The root directory is basically the first thing you see when you open a file explorer on your phone. In other words, do not put the file in a folder. The files which you can find in Phone storage interface of File Manager locate the root directory.

1. Install the firmware:

If you can enter your phone, click the firmware in File Manager to install it.

If you cannot enter your phone, follow the above steps to enter Recovery mode, then select Install update>Phone Storage or SD card>select the firmware>touch Next to install it.

For the phones with the 16:9 display screen:

1. Perform Wipe data on your phone:
2. Power off your phone, then press and hold the Power button and Volume up button simultaneously until Vivo logo appears to enter Recovery mode;
3. Touch Wipe data>Wipe data>Wipe data Then select Reboot system to reboot your phone(For Funtouch OS 2.0 and lower version, select Recovery mode by pressing Volume down button, enter it by pressing the Power button. Then select wipe data/factory reset>wipe data>wipe data, and then select reboot system now to reboot your phone).
4. Download the corresponding firmware for your phone;
5. Move it to the root directory of your phone storage or SD card without decompressing;

Note: The root directory is basically the first thing you see when you open a file explorer on your phone. In other words, do not put the file in a folder. The files which you can find in Phone storage interface of File Manager locate the root directory.

1. Install the firmware:

If you can enter your phone, click the firmware in File Manager to install it.

If you cannot enter your phone, follow the above steps to enter Recovery mode, then select Install update>Phone Storage or SD card>select the firmware>touch Next to install it(For Funtouch OS 2.0 and lower version, select “apply update from internal sdcard(Phone storage)”  or “apply update from external sdcard(SD card)”, then select the firmware to install).

Detailed Tutorial with Pictures on How to Flash Vivo Stock Rom Firmware Flash File

Warning
We will not be held responsible if any damage happens to your device.

Vivo Y53C Stock Firmware Rom
PD1628F_EX_A_3.2.2

Download Full stock Rom