AOSP Android 10.0 Q Custom Rom For Blackview BV9500
AOSP Android 10.0 Q Custom Rom For Blackview BV9500

Good News to all Blackview BV9500 users. Now you can now Download and install AOSP Android 10.0 Q For Blackview BV9500 without any error. Today we will be giving you steps on How to flash the AOSP Android 10.0 Q custom Rom for  BQ Aquaris C; this ROM is based on Android 10.0 Q GSI with Treble Enabled.

The GSI stands for Generic System image. The moniker “Generic” implies that system images can be installed on any device that is Treble-enabled, irrespective of the manufacturer they belong to.

The full Credits goes to Phusson the XDA Recognized Developer the man behind the work of Project Treble GSI builds. With the help of Project treble, the Custom ROM development community has completely been boosted. We’ve seen the Mokee OS, Resurrection Remix, Pixel Experience, and Lineage OS has made their way to support most of the budget smartphone based on Lineage, Exynos, Kirin, and other obscure brands.

Download Blackview BV9500 Stock Rom Firmware Flash File

Blackview BV9500 Key Spec

  • Brand – Blackview
  • Model – BV9500
  • Device Type – Android 4G Smartphone
  • CPU – Octa-Core (4 x 2.3GHz Cortex A53, 4 x 1.65GHz Cortex A53) CPU Clock
  • Chipset – MediaTek Helio P23 MT6763T, 64-bit Processor
  • GPU – Mali-G71MP2 @770MHz, 2-Cores GPU
  • Camera – 12 Megapixels Sony IMX298 + 0.3 Megapixel Dual-LED and AF Rear Camera | 13 Megapixel Samsung S5K3L8 Front camera
  • Memory – RAM- 4GB LPDDR4X, 1600MHz | ROM 64GB External Memory Supports Up to 128GB Using TF Card
  • Display – Screen size 5.7 inches IPS, LCD FHD+ Display (2160 x 1080 Pixels), 18:9 Ratio
  • Battery – Non-Removable 10,000mAh Lithium-Ion BAK with 12V/2A Wireless Charging
  • SIM – Dual SIM (Micro-SIM + Micro-SIM), Dual Standby
  • Sensors – Fingerprint Sensor, Proximity, Ambient Light, Accelerometer Sensor, Compass, Barometer
  • Color – Black, Green, Yellow
  • Operating System – Android 8.1 Oreo OS
  • I/O Interface – 2 x Micro SIM Card Slot, TF Card Slot, USB Type-C Port, 3.5mm Audio Out Port, Power Button, Volume Button, Microphone, Speaker
  • Dimensions – 81.8 mm x 165 mmx 18.7 mm
  • Weight – 365 Grams (with Battery)
  • More Features – Metal & Plastic Body Design, Samsung S5K3L8 front, Sony IMX298E rear, Cat-6, IPS FHD+ Display, Wi-Fi, Fingerprint Sensor, Bluetooth, Dual-SIM, Triple-Camera, S12V/2A Wireless Charging, VoLTE, 18:9 Display Ratio, LAN Intercom IP68, IP69K, MIL-STD-810G, Oreo OS, Protected Against Dust, Close-Range High Pressure, High Temperature Spray Downs, United States Military Standard.

Working:

  • boot
  • SIM
  • WiFi only 5GHZ
  • hotspot
  • GPS

ROM Bugs:

  • Hotspot (To share hotspot connection with PC, install Pdanet app)

Pre-Requisites:

  • Charge your phone up to 50% or more.
  • Download ADB and Fastboot tool [To flash via ADB Sideload Method]
  • Your phone should have a custom recovery installed in order to install this ROM
  • This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Don’t worry we are going to share step by step guide to safely

Disclaimer We will not be responsible for any damages to your device that may happen while/after flashing this Android 10.0 Q. We don’t recommend you to try this ROM as a daily driver. So far this ROM worked smoothly on many devices. This ROM may or may not be completely stable.

How to Flash AOSP Android 10.0 Q for  BQ Aquaris C

Please do follow the below guide to enjoy this Android 10.0 Q custom Rom for  BQ Aquaris C.

Flash the GSI AOSP Using ADB Fastboot Method

Now, this method requires you have ADB and fastboot tool setup on your computer.

  • Firstly, Download the Generic System Image Aosp Custom Rom for Blackview BV9500on your computer.
  • Next Factory reset your Android device.
  • Copy the downloaded GSI Rom your ADB and fastboot folder. Usually, it’s in C Drive, C:\adb.
  • While in the ADB folder, hold the SHIFT key on your keyboard and then right-click on an empty space inside the folder to give your the following pop up showing on the below image.
  • Select the ‘Open PowerShell window here’ option.
  • Enable USB debugging on your device and connect it to the PC.
  • Reboot your smartphone into the bootloader mode using this ADB command

adb reboot bootloader

  • Now, type the following command to install GSI Rom on your  BQ Aquaris C

fastboot flash system “system_img_name”.img

  •  In the above command, replace the system_img_name with the actual GSI Rom file name you downloaded.
  • It flashing processing will take a while. After it complete, use the following command to reboot your Android device.

fastboot reboot

Flash the GSI USing TWRP Method

  1. Download GSI Android 10.0 Q Rom.
  2. Move it to your device external or internal storage.
  3. Switch off your device then > Press the following Combo Power + Vol Down button to boot into your TWRP recovery mode.
  4. Once you are in TWRP Recovery, take a backup of your current Rom using TWRP.
  5. In the TWRP menu, To Wipe data: Go to Wipe —> Advanced Wipe and select Dalvik/ART cache, cache, System, Vendor, and Data and then swipe to wipe.
  6. Warning: Make sure not to select Internal storage
  7. Now wipe the cache, data, and system before flashing the Android Pie 9.0 on  BQ Aquaris C.
  8. Now go back to TWRP Menu then click on the install button you can install the System image file in TWRP: Install -> Install Image -> select system.img
  9. After the installation is done
  10. Reboot your device and enjoy the wonderful AOSP Android 10.0 Q for  BQ Aquaris C!

AOSP ROM and Gapps Package:

LEAVE A REPLY

Please enter your comment!
Please enter your name here