Download Celkon CliQ 2 Stock Rom Firmware Flash File
Celkon CliQ 2 Stock Rom Firmware
Table of Contents
This post contains the Celkon CliQ 2 Stock Rom firmware Flash File that will allow you to restore your Celkon CliQ 2 Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this Celkon CliQ 2 Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Celkon CliQ 2 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Celkon CliQ 2 Flash File below. Download the right stock ROM file to fix your device.
You can solve software errors by flashing Stock ROM.
To gain your device warranty Back.
Why you need Celkon CliQ 2 Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.
Downgrade or Upgrade your device: You can use the CELKON CLIQ 2 Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
Unbrick: The Celkon CliQ 2 Stock Rom Firmware can also be used to unbrick any device. Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.
Unroot: You can also use the Celkon CliQ 2 stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Celkon CliQ 2 Flash File.
Things You Need
Charge your device: Before you proceed with the below information, you are recommended to ensure that your Celkon CliQ 2is at least 50% charged.
PC or Laptop:To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
Take Device Backup: The very first thing you need to do is make a backup.
Install the Latest Driver:CELKON CLIQ 2 USB Drivers
Download: Download the above-required files on your PC.
[*] Caution: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
How To Flash Celkon CliQ 2 Stock Rom Firmware
Download the Stock Firmware on your personal computer.
Install the USB MTK Drivers (skip if you have it already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug your device and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
