Download Cubot J8 Stock Rom Firmware Flash File

0
1246
Download Cubot J8 Stock Rom Firmware Flash File
Cubot J8 Stock Rom Firmware Flash File

Cubot J8 Stock Rom Firmware

This post contains the Cubot J8 Stock Rom firmware Flash File that will allow you to restore your Cubot J8 Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked, and wish to return it to factory state.

Then this Cubot J8 Stock Firmware will fix your bricked phone; We will guide you on how to flash the right official Cubot J8 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Cubot J8 Flash File below. Download the right stock ROM file to fix your device.

Cubot J8 Stock Firmware Information

Rom Name Cubot J8 Stock Firmware Rom
Based On Stock OS
Rom OS Version Android 10
Rom Type Odexed
Socs MT6580
Software needed Sp Flash Tool
Compress Zip format

 

Cubot J8 Key Spec                    

NETWORK

Technology GSM / HSPA
2G Network Bands GSM 850 / 900 / 1800 / 1900 – SIM 1 & SIM 2

 View More

LAUNCH

Announced 2020, August
Status Available. Released 2020, September

BODY

Dimensions 146.8 x 71.2 x 9.2 mm
Weight 155 grams
Build Plastic
SIM Dual SIM (Micro-SIM, dual stand-by)

DISPLAY

Display Type IPS LCD capacitive touchscreen, 16M colors
Size 5.5 inches, 68.9 cm2 (~73.2% screen-to-body ratio)
Resolution 540 x 960 pixels, 18:9 ratio (~219 ppi density)
Touch Screen Yes, up to 3 fingers
Display Protection Scratch Resistant Glass

PLATFORM

Operating System Android 10
Chipset Mediatek MT6580
CPU Quad-core 1.3 GHz Cortex-A7 (32nm)
GPU Mali-400MP2

MEMORY

RAM (Memory) 2 GB
Storage Capacity 16 GB
Card Slot Yes, up to 32 GB via microSD card
Phonebook Practically Unlimited
Call Record Practically Unlimited

MAIN CAMERA

Camera Type Triple Lenses
Camera Sensor(s) 13 MP + 0.3 MP + 0.3 MP main camera

 View More

SELFIE CAMERA

Camera Type Single Lens
Camera Sensor(s) 8-megapixel

 View More

SOUND

Loudspeaker Yes
Speaker Location Back
Audio Jack Type Yes, 3.5mm audio jack
Sound Enhancements None

CONNECTIVITY

USB Micro USB 2.0
Bluetooth Bluetooth 4.2
Wi-fi Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
NFC
GPS Yes
FM Radio Yes

BATTERY

Battery Capacity Removable Li-Ion 3100 mAh battery
Fast Charging No

 View More

OTHER FEATURES

Sensors FaceID, Accelerometer, proximity
Colors Phantom Black, Champagne Gold

The Advantage Of Stock Firmware:

  • Can be to unbrick your phone
  • Fix the Boot loop problem
  • upgrade and Downgrade your phone
  • Unroot and Fix Bugs on your phone
  • To fix stutter
  • You can solve software errors by flashing Stock ROM.
  • To gain your device warranty Back.

Download Cubot King Kong Mini2 Stock Rom Firmware Flash File

Android 10 Q Feature List

  • Adaptive Battery
  • Dark Mode
  • App Actions
  • App Timer
  • Adaptive Brightness
  • Slices
  • Accessibility Menu
  • Easier Text Selection
  • New Screenshot Shortcut
  • A New Home Button
  • New Gesture Navigation
  • Easier Screen Rotation
  • Notification Details
  • Dashboard
  • Indoor Navigation via Wi-Fi RTT
  • An Improved DND Mode
  • Lockdown Mode
  • An Improved Message App
  • All Apps use HTTPS
  • The Media Panel
  • ART Improvements
  • 157 New Emojis
  • Wind Down
  • Multiple Camera Support
  • Wi-Fi MAC Randomization

Why you need Cubot J8 Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for the following reasons someday.

  • Downgrade or Upgrade your device: You can use the CUBOT J8 Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
  • Unbrick: The Cubot J8 Stock Rom Firmware can also be used to unbrick any device.  Smartphones can be bricked while trying to root it or flashing a custom rom or recovery.
  • Unroot: You can also use the Cubot J8 stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
  • Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Cubot J8 Flash File.

Things You Need

  • Charge your device: Before you proceed with the below information, you are recommended to ensure that your Cubot J8is at least 50% charged.
  • PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing you need to do is make a backup.
  • Smart Phone Flash Tool Download
  • Install the Latest Driver: CUBOT J8 USB Drivers
  • Download: Download the above-required files on your PC.

[*] Caution: On Mediatek powered devices, We do NOT recommend Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

How To Flash Cubot J8 Stock Rom Firmware

  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  4. Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
  5. Select the Scatter File from the extracted Stock Firmware on your computer.
  6. Select the Download Only in the SP flash tool option
  7. Click the Download button to start the Formatting process.
  8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding the power button only so that the flashing process will starting working
  9. Patiently wait for your device to be formatted.
  10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  11. Unplug your device and boot it up.
  12. If you have a boot loop after booting your device, boot into recovery mode, and do a factory reset.
  13. Voila, you are all good.

Detailed Post on How to Flash Stock Rom using Smart Phone Flash Tool

How to flash this device using Tecno Transsion Flash Tool

  1. Download and extract Tecno flash tool from here
  2. Launch SWD_AfterSales inside the extracted folder
  3. Click on the settings icon
  4. Click on the Load button
  5. Select the scatter file inside the stock ROM folder of the device you want to flash
  6. Select either Firmware Upgrade or Format + Download from the drop down menu.
  7. Click Confirm Button.
  8. Now turn off and connect your device to your PC.
  9. Wait for the flashing process to complete.
  10. Reboot device

NOTE
If while loading the scatter file you see a checksum error, copy checksumgen.exe into the firmware folder and then launch it.

Warning
We will not be held responsible if any damage happens to your device.

Cubot J8 Stock Firmware Rom

CUBOT_J8_A043C_V04_20200828

Download Full stock Rom

CUBOT_J8_A043C_V07_20210310

Download Full stock Rom

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here