Download Cubot Max 3 Stock Rom Firmware Flash File

0
1173
Download Cubot Max 3 Stock Rom Firmware Flash File
Cubot Max 3 Stock Rom Firmware Flash File

Cubot Max 3 Stock Rom Firmware

This post contains the Cubot Max 3 Stock Rom firmware Flash File that will allow you to restore your Cubot Max 3 Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked, and wish to return it to factory state.

Then this Cubot Max 3 Stock Firmware will fix your bricked phone; We will guide you on how to flash the right official Cubot Max 3 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Cubot Max 3 Flash File below. Download the right stock ROM file to fix your device.

Cubot Max 3 Stock Firmware Information

Rom Name Cubot Max 3 Stock Firmware Rom
Based On Stock OS
Rom OS Version Android 11
Rom Type Odexed
Socs Mediatek MT6762D Helio A25
Software needed Sp Flash Tool
Compress Zip format

 

Download Cubot J8 Stock Rom Firmware Flash File

Cubot Max 3 Key Spec                    

NETWORK

Technology GSM / HSPA / LTE
2G Network Bands GSM 850 / 900 / 1800 / 1900 – SIM 1 & SIM 2

 View More

LAUNCH

Also Known As Cubot Max 3
Announced 2021, August 03
Status Available. Released 2021, August

BODY

Dimensions 173 x 77 x 9.35 mm
Weight
SIM Dual SIM (Nano-SIM, dual stand-by)

DISPLAY

Display Type IPS LCD capacitive touchscreen, 16M colors
Size 6.95 inches, 102.1 cm2 (~81.3% screen-to-body ratio)
Resolution 720 x 1640 pixels, 20.5:9 ratio (~254 ppi density)
Touch Screen Yes, up to 5 fingers

PLATFORM

Operating System Android 11
Chipset Mediatek MT6762D Helio A25 (12 nm)
CPU Octa-core (4×1.8 GHz Cortex-A53 & 4×1.4 GHz Cortex-A53)
GPU PowerVR GE8320

MEMORY

RAM (Memory) 4 GB
Storage Capacity 64 GB
Card Slot Yes, up to 256 GB via microSD card (uses dedicated slot)
Phonebook Practically Unlimited
Call Record Practically Unlimited

MAIN CAMERA

Camera Type Triple Lenses
Camera Sensor(s) Main: 48 MP
Macro: 5 MP
Depth: 0.3 MP

 View More

SELFIE CAMERA

Camera Type Single Lens
Camera Sensor(s) 16-megapixel

 View More

SOUND

Loudspeaker Yes
Speaker Location Chin, below display
Audio Jack Type Yes, 3.5mm audio jack

CONNECTIVITY

USB USB Type-C 2.0, USB On-The-Go
Bluetooth Bluetooth 5.0, A2DP
Wi-fi Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
NFC
GPS Yes, with A-GPS, GLONASS, GALILEO, BDS
FM Radio Yes, FM Radio

BATTERY

Battery Capacity Non-removable Li-Po 5000 mAh battery

OTHER FEATURES

Sensors Fingerprint (side-mounted), accelerometer, proximity
Colors Green and Black

 

The Advantage Of Stock Firmware:

  • Can be to unbrick your phone
  • Fix the Boot loop problem
  • upgrade and Downgrade your phone
  • Unroot and Fix Bugs on your phone
  • To fix stutter
  • You can solve software errors by flashing Stock ROM.
  • To gain your device warranty Back.

Why you need Cubot Max 3 Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for the following reasons someday.

  • Downgrade or Upgrade your device: You can use the CUBOT MAX 3 Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
  • Unbrick: The Cubot Max 3 Stock Rom Firmware can also be used to unbrick any device.  Smartphones can be bricked while trying to root it or flashing a custom rom or recovery.
  • Unroot: You can also use the Cubot Max 3 stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
  • Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Cubot Max 3 Flash File.

Things You Need

  • Charge your device: Before you proceed with the below information, you are recommended to ensure that your Cubot Max 3is at least 50% charged.
  • PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing you need to do is make a backup.
  • Smart Phone Flash Tool Download
  • Install the Latest Driver: CUBOT MAX 3 USB Drivers
  • Download: Download the above-required files on your PC.

[*] Caution: On Mediatek powered devices, We do NOT recommend Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

How To Flash Cubot Max 3 Stock Rom Firmware

  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  4. Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
  5. Select the Scatter File from the extracted Stock Firmware on your computer.
  6. Select the Download Only in the SP flash tool option
  7. Click the Download button to start the Formatting process.
  8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding the power button only so that the flashing process will starting working
  9. Patiently wait for your device to be formatted.
  10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  11. Unplug your device and boot it up.
  12. If you have a boot loop after booting your device, boot into recovery mode, and do a factory reset.
  13. Voila, you are all good.

Detailed Post on How to Flash Stock Rom using Smart Phone Flash Tool

How to flash this device using Tecno Transsion Flash Tool

  1. Download and extract Tecno flash tool from here
  2. Launch SWD_AfterSales inside the extracted folder
  3. Click on the settings icon
  4. Click on the Load button
  5. Select the scatter file inside the stock ROM folder of the device you want to flash
  6. Select either Firmware Upgrade or Format + Download from the drop down menu.
  7. Click Confirm Button.
  8. Now turn off and connect your device to your PC.
  9. Wait for the flashing process to complete.
  10. Reboot device

NOTE
If while loading the scatter file you see a checksum error, copy checksumgen.exe into the firmware folder and then launch it.

Warning
We will not be held responsible if any damage happens to your device.

Cubot Max 3 Stock Firmware Rom

CUBOT_MAX 3_B011C_V06_20210729

Download Full stock Rom

LEAVE A REPLY

Please enter your comment!
Please enter your name here