InnJoo Max3 LTE Stock Rom Firmware
This post contains the InnJoo Max3 LTE Stock Rom firmware Flash File that will allow you to restore your InnJoo Max3 LTE Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this InnJoo Max3 LTE Stock Firmware will fix your bricked phone; We will guide on how to flash the right official InnJoo Max3 LTE Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the InnJoo Max3 LTE Flash File below. Download the right stock ROM file to fix your device.
InnJoo Max3 LTE Stock Firmware Information
|Rom Name||InnJoo Max3 LTE Stock Firmware Rom|
|Based On||Stock OS|
|Rom OS Version||Android 8.0|
|Software needed||Recovery, Sp Flash Tool. QFL|
InnJoo Max3 LTE Key Spec
Dimensions: 80.6 x 160.5 x 8.6 mm
Weight: 215 g
SoC: MediaTek MT6735P
CPU: ARM Cortex-A53, 1000 MHz, Cores: 4
GPU: ARM Mali-T720 MP1, 400 MHz, Cores: 1
RAM: 2 GB, 533 MHz
Storage: 16 GB
Memory cards: microSD, microSDHC, microSDXC
Display: 6 in, IPS, 720 x 1280 pixels, 24 bit
Battery: 4000 mAh, Li-Polymer
OS: Android 5.1.1 Lollipop
Camera: 4160 x 3120 pixels, 1280 x 720 pixels, 30 fps
SIM card: Micro-SIM, Nano-SIM / microSD
Wi-Fi: b, g, n, Wi-Fi Hotspot
USB: 2.0, Micro USB
Positioning: GPS, A-GPS
The Advantage Of Stock Firmware:
- Can be to unbrick your phone
- Fix the Boot loop problem
- upgrade and Downgrade your phone
- Unroot and Fix Bugs on your phone
- To fix stutter
- You can solve software errors by flashing Stock ROM.
- To gain your device warranty Back.
Why you need InnJoo Max3 LTE Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.
- Downgrade or Upgrade your device: You can use the INNJOO MAX3 LTE Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
- Unbrick: The InnJoo Max3 LTE Stock Rom Firmware can also be used to unbrick any device. Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.
- Unroot: You can also use the InnJoo Max3 LTE stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
- Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the InnJoo Max3 LTE Flash File.
Things You Need
- Charge your device: Before you proceed with the below information, you are recommended to ensure that your InnJoo Max3 LTEis at least 50% charged.
- PC or Laptop:To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
- Take Device Backup: The very first thing you need to do is make a backup.
- Smart Phone Flash Tool Download
- Install the Latest Driver: INNJOO MAX3 LTE USB Drivers
- Download: Download the above-required files on your PC.
How To Flash InnJoo Max3 LTE Stock Rom Firmware
- Download the Stock Firmware on your personal computer.
- Install the USB MTK Drivers (skip if you have it already installed).
- Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
- Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool option
- Click the Download button to start the Formating process.
- Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
- Patiently wait for your device to be formatted.
- After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
- Unplug your device and boot it up.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Voila, you are all good.
We will not be held responsible if any damage happens to your device.
InnJoo Max3 LTE Stock Firmware Rom