Download PD1708F_EX_A_3.10.1 update for Vivo V7 Plus
Download PD1708F_EX_A_3.10.1 update for Vivo V7 Plus

PD1708F_EX_A_3.10.1 update for Vivo V7 Plus:

Download & Install PD1708F_EX_A_3.10.1 update For Vivo V7 Plus. If you own Vivo V7 Plus device then You can update it to the latest OS using the Below Instructions. The PD1708F_EX_A_3.10.1 Firmware update For Vivo V7 Plus with Latest Google Security Patches as Well as Some Minor Improvement’s.

Key Specs & Features of Vivo V7 Plus

  • Operating System. Android v7.1 (Nougat)
  • 5.99 inches (15.21 cm) bezel-less display.
  • Qualcomm Snapdragon 450 Tru-Octa Core Processor. 4 GB RAM. 64 GB internal storage, expandable upto 256 GB.
  • 16 MP Rear Camera. 24 MP Front Camera.
  • 3225 mAh battery.

How to Flash Vivo V7 Plus PD1708F_EX_A_3.10.1 update:

Warmly Tips:

Limited by Android 8 and higher version, the phones with Android 8 and higher version cannot flash the lower version(You can check the current version of your phone in Settings>System update).

This process will clear data on your phone, like contacts, messages. Please back up your important data before doing it. Moreover, make sure the battery capacity is sufficient(over 30%).

For the Fullview Display phones:

  1. Perform Wipe data on your phone:
  2. Power off your phone, then press and hold the Power button and Volume up button simultaneously until Vivo logo appears to enter Fastboot mode. Select the Recovery mode by pressing the Volume down button and enter it by pressing the Power button;
  3. Touch Wipe data>Wipe data>enter the lock screen password. Then select Reboot system to reboot your phone.
  4. Download the corresponding firmware for your phone;
  5. Move it to the root directory of your phone storage or SD card without decompressing;

Note: The root directory is basically the first thing you see when you open a file explorer on your phone. In other words, do not put the file in a folder. The files which you can find in Phone storage interface of File Manager locate the root directory.

  1. Install the firmware:

If you can enter your phone, click the firmware in File Manager to install it.

If you cannot enter your phone, follow the above steps to enter Recovery mode, then select Install update>Phone Storage or SD card>select the firmware>touch Next to install it.

For the phones with the 16:9 display screen:

  1. Perform Wipe data on your phone:
  2. Power off your phone, then press and hold the Power button and Volume up button simultaneously until Vivo logo appears to enter Recovery mode;
  3. Touch Wipe data>Wipe data>Wipe data Then select Reboot system to reboot your phone(For Funtouch OS 2.0 and lower version, select Recovery mode by pressing Volume down button, enter it by pressing the Power button. Then select wipe data/factory reset>wipe data>wipe data, and then select reboot system now to reboot your phone).
  4. Download the corresponding firmware for your phone;
  5. Move it to the root directory of your phone storage or SD card without decompressing;

Note: The root directory is basically the first thing you see when you open a file explorer on your phone. In other words, do not put the file in a folder. The files which you can find in Phone storage interface of File Manager locate the root directory.

  1. Install the firmware:

If you can enter your phone, click the firmware in File Manager to install it.

If you cannot enter your phone, follow the above steps to enter Recovery mode, then select Install update>Phone Storage or SD card>select the firmware>touch Next to install it(For Funtouch OS 2.0 and lower version, select “apply update from internal sdcard(Phone storage)”  or “apply update from external sdcard(SD card)”, then select the firmware to install).

Detailed Tutorial with Pictures on How to Flash Vivo Stock Rom Firmware Flash File

Vivo V15 Pro Stock Firmware Rom

 PD1708F_EX_A_3.10.1

LEAVE A REPLY

Please enter your comment!
Please enter your name here