Xiaomi MI 10T Pro INEI Number QCN File is now available for download, use the MI 10T Pro QCN File to Repair your device Null IMEI Number, MAC & BT address, unknown baseband,
Xiaomi MI 10T Pro Key Spec
- Dimensions; weight: 165.1 x 76.4 x 9.3 mm; 218 grams.
- Display: 6.67-inch 1080 x 2400; IPS LCD, 144Hz, HDR10+, 650 nits (max)
- CPU: Octa-core Snapdragon 865 with Adreno 650 GPU.
- Storage and RAM: 128/256 GB and 8GB RAM without car slot.
- OS: Android 10 with MIUI 12
Requirement:
- QPST Here
- QCN Rebuilder
- QCN Xiaomi MI 10T Pro: Download
- Patience.
Note: You can use any supported box.
How to Repair Xiaomi MI 10T Pro IMEI Number
- Download all the required files from the link above.
- Now Run the QCN Rebuilder.exe file by double-clicking on it.
- Next, select the downloaded QCN File
- Replace IMEI Number With the Original IMEI Number ( don’t change otherwise Your Phone will Not accept it). then click Rebuild
- Now Enable USB debugging and connect Phone to PC
- Send the below code via CMD
Reset EFS Partition:
adb shell dd if=/dev/zero of=/dev/block/sdf8 dd if=/dev/zero of=/dev/block/sdf9 dd if=/dev/zero of=/dev/block/sdf7 dd if=/dev/zero of=/dev/block/sdf10
Enable Diag Port:
- Restore EFS backup via TWRP (or flash modemst1 modemst2 & fsg via fastboot)
- Then send the below code over ADB
adb shell su setprop sys.usb.config rndis,diag,adb
- Then Run QPST. Go to the Restore tab and Select the Rebuilded QCN file
- Then Click Restore
- Done.
