Download Lenovo IdeaTab Stock Rom Firmware Flash File
Lenovo IdeaTab Stock Rom Firmware
This post contains the Lenovo IdeaTab Stock Rom firmware Flash File that will allow you to restore your Lenovo IdeaTab Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this Lenovo IdeaTab Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Lenovo IdeaTab Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Lenovo IdeaTab Flash File below. Download the right stock ROM file to fix your device.
Lenovo IdeaTab Stock Firmware Information
Table of Contents
Rom Name
Lenovo IdeaTab Stock Firmware Rom
Based On
Stock OS
Rom OS Version
Android 4.0
Rom Type
Odexed
Socs
MediaTek
Software needed
SP Flash Tools
Compress
Zip format
Lenovo IdeaTab Key Spec
GENERAL
Release date
January 2013
Dimensions (mm)
125.00 x 195.10 x 11.90
Weight (g)
400.00
Battery capacity (mAh)
3550
Removable battery
No
DISPLAY
Screen size (inches)
7.00
Touchscreen
No
Resolution
1024×600 pixels
Pixels per inch (PPI)
170
HARDWARE
Processor
1GHz
Processor make
MediaTek
RAM
1GB
Internal storage
16GB
Expandable storage
Yes
Expandable storage type
microSD
Expandable storage up to (GB)
32
CAMERA
Rear camera
3.15-megapixel
Rear Flash
No
Front camera
0.3-megapixel
SOFTWARE
Operating system
Android 4.0
CONNECTIVITY
Wi-Fi
Yes
Wi-Fi standards supported
802.11 b/g/n
GPS
Yes
Bluetooth
Yes
Bluetooth version
3.00
NFC
No
Infrared
No
USB OTG
No
Headphones
3.5mm
FM
No
SENSORS
Compass/ Magnetometer
No
Proximity sensor
Yes
Accelerometer
Yes
Ambient light sensor
No
Gyroscope
No
Barometer
No
Temperature sensor
No
The Advantage Of Stock Firmware:
Can be to unbrick your phone
Fix the Boot loop problem
upgrade and Downgrade your phone
Unroot and Fix Bugs on your phone
To fix stutter
You can solve software errors by flashing Stock ROM.
To gain your device warranty Back.
Why you need Lenovo IdeaTab Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.
Downgrade or Upgrade your device: You can use the LENOVO IDEATAB Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
Unbrick: The Lenovo IdeaTab Stock Rom Firmware can also be used to unbrick any device. Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.
Unroot: You can also use the Lenovo IdeaTab stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Lenovo IdeaTab Flash File.
Things You Need
Charge your device: Before you proceed with the below information, you are recommended to ensure that your Lenovo IdeaTab is at least 50% charged.
PC or Laptop:To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
Take Device Backup: The very first thing you need to do is make a backup.
Install the Latest Driver:LENOVO IDEATAB USB Drivers
Download: Download the above-required files on your PC.
How To Flash Lenovo IdeaTab Stock Rom Firmware
Download the Stock Firmware on your personal computer.
Install the USB MTK Drivers (skip if you have it already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug your device and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.
Warning
We will not be held responsible if any damage happens to your device.
