Download Pipo N1 Stock Rom Firmware Flash File

0
979
Download Pipo N1 Stock Rom Firmware Flash File
Download Pipo N1 Stock Rom Firmware Flash File

Pipo N1 Stock Rom Firmware

This post contains the Pipo N1 Stock Rom firmware Flash File that will allow you to restore your Pipo N1 Smartphone to its original state.  You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.

Then this Pipo N1 Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Pipo N1 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Pipo N1 Flash File below. Download the right stock ROM file to fix your device.

Pipo N1 Stock Firmware Information

Rom Name Pipo N1 Stock Firmware Rom
Based On Stock OS
Rom OS Version Android 8.0
Rom Type Odexed
Socs Qualcomm
Software needed Sp Flash Tool
Compress Zip format

 

Pipo N1 Key Spec                    

General

  • Model
    PiPO N1
  • Released
    Nov, 2018
  • Status
    Available

Design

  • Type
    Bar
  • Dimensions
    264.5 x 181 x 13.4 mm
  • Weight
    Grams (With Battery)
  • Waterproof
    No

Display

  • Display Type
    IPS, LCD Capacitive TouchScreen
  • Size
    8.0 inches
  • Resolution
    1920 x 1200 Pixels, 24 bit color depth
  • Display Colors
    Millions Colors
  • Pixel Density
    ~ 283 PPI Pixel Density
  • Touch Screen
    Yes with Multitouch Support Up to 10-Point
  • Display Protection
    Yes support
  • Features
    WUXGA IPS Retina Display
    283 PPI
    Capacitive
    Multi-touch

Hardware

  • CPU
    ARM Cortex-A53, 1300 MHz, Cores: 4
  • GPU
    ARM Mali-T720 MP2, Cores: 2
  • RAM (Memory)
    2 GB, 640 MHz
  • Internal Storage
    32 GB
  • Memory Card Slot
    microSD, microSDHC, microSDXC
  • Sensors
    Accelerometer

Software

  • Operating System
    Android 7.0 Nougat
  • User Interface
    Yes

Camera

  • Rear Camera
    2 Megapixel
  • Image
    1600 x 1200 Pixels
  • Video
    480p@30fps
  • Flash
    No
  • Front Camera
    2 Megapixels

Connectivity

  • Wi-fi
    b, g, n, Wi-Fi Direct
  • USB
    2.0, USB Type-C
  • GPS
    GPS, A-GPS
  • NFC
  • Wireless Charging
    No
  • Headphone Jack

Battery

  • Capacity
    6000 mAh, Li-Ion

The Advantage Of Stock Firmware:

  • Can be to unbrick your phone
  • Fix the Boot loop problem
  • upgrade and Downgrade your phone
  • Unroot and Fix Bugs on your phone
  • To fix stutter
  • You can solve software errors by flashing Stock ROM.
  • To gain your device warranty Back.

Why you need Pipo N1 Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.

  • Downgrade or Upgrade your device: You can use the PIPO N1 Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
  • Unbrick: The Pipo N1 Stock Rom Firmware can also be used to unbrick any device.  Smartphone’s can be bricked while trying to root it or flashing a custom rom or recovery.
  • Unroot: You can also use the Pipo N1 stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
  • Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Pipo N1 Flash File.

Things You Need

  • Charge your device: Before you proceed with the below information, you are recommended to ensure that your Pipo N1is at least 50% charged.
  • PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing you need to do is make a backup.
  • Smart Phone Flash Tool Download
  • Install the Latest Driver: PIPO N1 USB Drivers
  • Download: Download the above-required files on your PC.

[*] Caution: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

How To Flash Pipo N1 Stock Rom Firmware

  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
  5. Select the Scatter File from the extracted Stock Firmware on your computer.
  6. Select the Download Only in the SP flash tool option
  7. Click the Download button to start the Formating process.
  8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
  9. Patiently wait for your device to be formatted.
  10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  11. Unplug your device and boot it up.
  12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
  13. Voila, you are all good.

Detailed Post on How to Flash Stock Rom using Smart Phone Flash Tool

Warning
We will not be held responsible if any damage happens to your device.

Pipo N1 Stock Firmware Rom

LF109.N0.V10.16.JS-V02.4826

Password: 1ep9

Download Full stock Rom

LEAVE A REPLY

Please enter your comment!
Please enter your name here