How to Reboot in EDL, Fastboot Recovery Mod, test Point Pinout on Redmi 8

Xiaomi Redmi 8 to Recovery Fastboot & EDL Mod:

On this, Post we will be giving you guidance step by Step on how to boot Xiaomi Redmi 8 to fastboot, Recovery & EDL Mod, if You own a Xiaomi Redmi 8 device and Want to boot it in Recovery Fastboot & EDL Mod then You Can Do it by Following the Below Instructions.

Xiaomi Redmi 8 Key Spec 

• Display: The Redmi 8 comes with a 6.22-inch HD+ IPS display.
• Processor: The Redmi 8 is powered by Qualcomm Snapdragon 439 processor.
• RAM: 3GB RAM and 4GB RAM
• Storage: 32GB and 64GB storage
• Back camera: On the rear panel the Redmi 8 includes two cameras. The primary camera uses a 12MP Sony IMMX363 sensor while the secondary camera includes a 2MP depth sensor.
• Front camera: For selfies, the Redmi 8 equips an 8MP camera sensor.
• Battery: The Redmi 8 comes with a massive 5000mAh battery with 18W fast charging support.
• Software: The Redmi 8 runs MIUI 10 based on Android 9 Pie.

How to Reboot Redmi 8 to Fastboot mode:

Steps:

• Switch Off Phone.
• Once off, together Press the Power and Volume down button.
• This Will turn the Device on and You need to hold both the buttons till the Device logo Disappears.
• After this, Simply Wait for the time till your device boots into the Fastboot Mode.

Reboot to bootloader using adb.

• Enable usb debugging
• Connect Phone to PC with usb
• open cmd on adb folder
• type This code and hit enter:

adb reboot bootloader

Reboot Xiaomi Redmi 8 to Recovery Mode:

Steps:

1. Switch Off Phone.
2. Once off together Press the Power and volume up button.
3. once the Device Logo appears Release the Button.
4. After this Simply Wait for the time till Your device boots into the Recovery Mode.

Reboot to Recovery using adb.

• Enable USB debugging
• Connect Phone to PC with usb
• open CMD on Platform tool Folder
• type this code and hit enter:

adb reboot recovery

How to Boot Xiaomi Redmi 8 to EDL 9008 Mod:

Method 1:

• Enable USB Debugging
• Connect Phone to PC
• Send The command Via adb

adb reboot edl

Method 2:

• Install QD Loader Driver on PC
• Remove back Cover of Phone
• Find out The Pinout as Show In Image
• Connect Phone to PC with usb Cable
• take a Coper Wire and Short that Pinout

Method 3:

• Download Fastboot to EDL tools
• Reboot Phone to Fastboot Mode and Connect to PC
• Now Run reboot.bat hit Enter. Done Phone booted in EDL Mod
• You Can use Miracle 2.82 Patched Here for Free, Install Run Qualcomm/fastboot to EDL