This post contains the Samsung SM-M315F Stock Rom firmware Flash File that will allow you to restore your Samsung SM-M315F Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this Samsung SM-M315F Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Samsung SM-M315F Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Samsung SM-M315F Flash File below. Download the right stock ROM file to fix your device.
You can solve software errors by flashing Stock ROM.
To gain your device warranty Back.
Why you need Samsung SM-M315F Firmware
It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.
Downgrade or Upgrade your device: You can use the SAMSUNG SM-M315F Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.
Unbrick: The Samsung SM-M315F Stock Rom Firmware can also be used to unbrick any device. Smartphone’s can be bricked while trying to root it or flashing a custom Rom or recovery.
Unroot: You can also use the Samsung SM-M315F stock Rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.
Fix Issues: Your device might develop issues that might be software related; you can fix that by flashing the Samsung SM-M315F Flash File.
Things You Need
Charge your device: Before you proceed with the below information, you are recommended to ensure that your Samsung SM-M315F is at least 50% charged.
PC or Laptop:To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
Take Device Backup: The very first thing you need to do is make a backup.
Install the Latest Driver:Samsung SM-M315F USB Drivers
Download: Download the above-required files on your PC.
How to Flash Samsung Stock Rom using Odin
These are the instructions to flash Samsung Stock ROM (original firmware) using Odin on Windows Computer.
Requirements: Your Samsung Smartphone should have at least 30-40 percent to perform the flashing process.
Flash Samsung Stock Rom using Odin
Download and install Samsung USB Driver on your computer. In case you have already installed the Samsung USB Driver on your computer then Skip this step.
Download (Stock ROM compatible with your device) and extract it on your computer.
Now, Enable USB Debugging on your Samsung Galaxy Device. To enable USB Debugging: Open Settings & Developers Option > USB Debugging & Tick to enable.
(Developers Option is hidden for Android 4.2.2 or above, to show the developer option Go to Settings > About Phone > Built Number (Tap on it for 5-8 times).
Power Off your Samsung Device.
Now, you have to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. When the phone vibrates Leave the Power Key but Keep holding the Volume Down Key and Home key. You will boot into the Download Mode.
In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume up key to continue.
Download and extract Odin on your computer. After extracting you will be able to see the following files:
Now, Open Odin3 and connect your phone to the computer.
Once you have connected the phone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.
Once your device is detected by Odin, click on the “PDA” button and select the tar.md5 file that you have extracted in Step #2.
Now, click on the “Start” button in Odin to begin the Flashing process.
Once you see, the Green Pass Message then remove the USB cable from the device (during this process, your device will restart automatically).
Your Samsung Device will now be stuck at boot (boot loop). Now, You have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When the phone vibrates Leave the Power Key but Keep holding the Volume UP Key and the Home key. You will boot into the Recovery Mode.
In Recovery Mode, Wipe Data/factory reset.
Once Cache Data is cleared, Select Restart Phone Now from the recovery menu.
Now, your Samsung Device will restart without any issue with the Stock Rom you have flashed.
We will not be held responsible if any damage happens to your device.
Techswizz is an all-rounder in a tech field. We work hard to serve you first, and best of all and to satisfy your hunger for Technology. Here you will be updated with the latest technology related tech/hacker news, hacking tutorials related to various security tips from the latest vulnerabilities and lots more.