Download Tecno Pop 1s Stock Rom Firmware Flash File

0
1880
Download Tecno Pop 1s Stock Rom Firmware Flash File
Tecno Pop 1s

Tecno Pop 1s Stock Rom Firmware

This post contains the Tecno Pop 1s Stock Rom firmware Flash File that will allow you to restore your Tecno Pop 1s smartphone to its original state.  You will find these stock rom files useful if you have used the flashed custom rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.

Then this Tecno Pop 1s Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Tecno Pop 1s Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Tecno Pop 1s Flash File below. Download the right stock ROM file to fix your device.

Tecno Pop 1s Key Spec

  • Model: Tecno POP 1s F4
  • Colors: Black, Blue, Gold
  • Body Material: Plastic
  • SIM Count: Dual Sim
  • SIM Type: Micro Sim
  • Network 2G, 3G, 4G
  • Android OS: 8.1 Oreo (HiOS)
  • Chipset: MediaTek MT6739
  • GPU: ARM Mali-400 MP2, 533 MHz
  • RAM/ROM: 1 /16 GB
  • Memory Support: Yes
  • Body Dimension: 71.58 x 148.14 x 8.6 mm
  • Display: 5.5-inch, IPS LCD capacitive touchscreen, 720 x 1440 pixels
  • Camera: Rear 8 MP with dual led / Front 5 MP with dual led
  • Battery: 3000 mAh Li-Polymer (non-Removable)

The Advantage Of Stock Firmware:

  • Can be to unbrick your phone
  • Fix the Boot loop problem
  • upgrade and Downgrade your phone
  • Unroot and Fix Bugs on your phone
  • To fix stutter
  • You can solve software errors by flashing Stock ROM.
  • To gain your device warranty Back.

Why you need Tecno Pop 1s Firmware

It’s always advisable that you backup your device Firmware after purchasing it. You are going to need your device stock Rom for these following reasons someday.

  • Downgrade or Upgrade your device.

You can use the Tecno Pop 1s Stock Rom Firmware to downgrade or upgrade your device to a new version. It depends on the release of the Stock firmware or your choice if the option is available.

  • Unbrick.

The Tecno Pop 1s Stock Rom Firmware can also be used to unbrick any device.  Smartphones can be bricked while trying to root it or flashing a custom rom or recovery.

  • Unroot Tecno Pop 1s.

You can also use the Tecno Pop 1s stock rom firmware to unroot your device completely. After flashing the official stock firmware, you will gain your warranty back.

  • Fix Issues.

Your device might develop issues that might be software related; you can fix that by flashing the stock firmware for Tecno Pop 1s.

How To Flash Tecno Pop 1s Stock Rom Firmware

  1. Download the Stock Firmware on your personal computer.
  2. Install the USB MTK Drivers (skip if you have it already installed).
  3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
  4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
  5. Select the Scatter File from the extracted Stock Firmware on your computer.
  6. Select the Download Only in the SP flash tool option
  7. Click the Download button to start the Formating process.
  8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
  9. Patiently wait for your device to be formatted.
  10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
  11. Unplug your device and boot it up.
  12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
  13. Volia your are all good.

Warning
We will not be held responsible if any damage happens to your device.

Tecno Pop 1s Stock Firmware Rom

Tecno Pop 1s (F4-H398MN-Go-180620V58)

LEAVE A REPLY

Please enter your comment!
Please enter your name here