Tecno H6 Latest Firmware/ Version 5g [Stock Rom ]
To all Tecno H6 users, this post was specifically made for you guys. I assume we all know that Tecno H6 is of two version or type, the OLD VERSION/ FIRMWARE: Build Number: H6-G325-20140923 has 2gb allocated free space for use and also the NEW VERSION/ FIRMWARE: Build Number: H6-G325-20150122S which comes with 5gb free space for use. Well, To get this new version Rom on your phone you will have to flash the new update Note: Your data will not be lost however, we would advise you to take a backup before proceeding to the following steps
- Not at all, everything’s working perfectly.
- NO, it’s Tecno H6 official latest stock firmware/ version.
- Download Tecno H6 Stock Rom Download Android Driver and SP Flash Tool For flashing the Update
- Do This First Before Flashing Rom ( Install Preloader Usb Vcom Drivers On Your Pc)
- Unzip the downloaded files. You can use software’s like WinRAR or 7Zip to do that if required.
- Open “Android Driver” and double click on
- If your phone is connected to the PC via USB, remove it before proceeding to the next step
- Open folder named “Flash Tool” and double click on “Flash_tool ” application file.
- Select “Scatter-loading ” option on the tool.
- Select file named “ MT6582_Android_scatter ” from the firmware folder
- Click on “Firmware-Upgrade ” option on the top as shown below & then select Download
- Connect your Tecno H6 with the USB cable provided by “ Tecno H6”, make sure your device is switched off before establishing a connection with more 50% battery backup.
- The upgrade process will be triggered and you would be able to see the following screen.
- The following screen will appear, on completion of the upgrade.
- CAUTION: DO NOT disconnect/ try to switch the device on while the upgrade is in progress.
- Disconnect your device and switch on your device again. Congratulations! You are now using the NEW VERSION/ FIRMWARE: Build Number: H6-G325-20150122S